audi_8d2_diag

Audi A4 B5 (8D2) HVAC Diagnostic Tool 🚗💻

A modern, web-based diagnostic and reverse-engineering tool for the Audi A4 B5 (1994-2001) Auto HVAC (Climate Control) module over the vintage KWP1281 protocol. Connect to your vehicle using a standard KKL (FTDI) diagnostic cable to read faults, stream live measurement blocks, and visualize sensor data on an interactive dashboard.

---

🌟 Key Features

🖥️ Modern Web Dashboard

• Glassmorphism UI: A sleek, dark-themed automotive dashboard accessible directly via a web browser.
• Port Auto-Detection: Automatically scans and connects to your KKL/FTDI serial port.

📊 Live Data & Gauges

• Real-Time Arc Gauges: Monitor vital systems like Compressor Status, System Voltage, and Cabin/Outside/Evaporator Temperatures.
• Live Data Monitor: Stream sensor data using Server-Sent Events (SSE) with real-time sparkline charts.
• Measurement Blocks: View raw and decoded sensor data across all 8 HVAC measurement groups utilizing 70+ VAG mathematical formulas.

🗺️ Interactive Sensor Map

• 2D Car SVG Diagram: See the exact physical location of every HVAC sensor (G17, G56, G65, G86, G89, G107, G263) and flap motor (V68, V70, V71, V85).
• Health Indicators: Sensor dots dynamically change color (Cyan = Normal, Orange = Warning, Red Pulsing = Fault/Open Circuit, e.g., -49°C readings).

🛠️ Diagnostics & Export

• Read & Clear Faults (DTCs): Built-in database of HVAC-specific fault codes with detailed status elaborations (Active, Stored, Intermittent).
• Export to JSON: Export full diagnostic reports (DTCs + Measurement Blocks) tailored for analysis by AI tools.

---

📋 Requirements

Hardware

• A genuine FTDI FT232RL based KKL VAG-COM cable. > ⚠️ Warning: Cheap clone chips often struggle with the precise 5-baud timing required to wake up the ECU.
• An Audi A4 B5 (8D2) or similar era VAG vehicle with a compatible Climate Control module (Address 0x08).

Software

• Python 3.9+
• Pip package manager

🚀 Installation & Setup

1. Clone this repository:

   git clone git@git.muradjabir.com:muradjabir/audi_8d2_diag.git
   cd audi_8d2_diag
   

2. Install the required Python dependencies:

   pip install -r requirements.txt
   

   (This project uses pyserial for hardware communication and Flask for the web server).

🏎️ Usage

1. Plug in: Connect your KKL cable to your vehicle's OBD-II port.
2. Power up: Turn the ignition to the ON position (the engine does not need to be running, but the climate control must have power).
3. Connect to PC: Plug the KKL cable into your computer's USB port.

4. Start the Server:

   python3 app.py
   

5. Launch Dashboard: Open your web browser and navigate to http://127.0.0.1:5000.

6. Select your port from the dropdown and click Connect.

---

⚙️ Technical Details

• Protocol: KWP1281 (Key-Word Protocol 1281) via K-Line (ISO 9141).
• Initialization: 5-baud "slow init" bit-banging via standard UART Break signals.
• Module Address: 0x08 (Auto HVAC).
• Communication: Byte-level complement acknowledgement system.
• Keep-Alive: Automatic background polling to prevent ECU timeouts.

---

⚠️ Safety Warning

CAUTION: This tool communicates directly with vehicle electronics on the K-Line. While it is designed to be read-only (with explicit confirmation required for clearing faults), using incorrect or cheap counterfeit cables can potentially introduce noise on the K-Line or cause communication errors. Do not use this tool while the vehicle is in motion. Use at your own risk.