Acasă Explorează Ajutor
Înregistrare Autentificare
muradjabir
/
audi_8d2_diag
1
0
Bifurcare 0
Fisiere Probleme 0 Trageți solicitările 0 Wiki

Fără Descriere

Arbore: 9ea5609bdb
Ramuri Etichete
audi_8d2_diag
ZIP TAR.GZ
Murad Jabir 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
static 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
templates 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
.gitignore 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
README.md 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
app.py 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
dtc_db.py 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
ecu_defs.py 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
kline.py 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
kwp1281.py 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
meas_decoder.py 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
port_scanner.py 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
requirements.txt 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă
test_init.py 9ea5609bdb Initial commit: Audi A4 B5 HVAC Diagnostic Tool 2 luni în urmă

README.md

Audi A4 B5 (8D2) HVAC Diagnostic Tool

A web-based diagnostic tool for the Audi A4 B5 (1994-2001) Auto HVAC (Climate Control) module over the KWP1281 protocol, using a standard KKL (FTDI) diagnostic cable.

Features

  • Web GUI: A modern, dark-themed automotive dashboard accessible via a web browser.
  • Port Auto-Detection: Automatically finds your KKL/FTDI serial port.
  • Read & Clear Faults (DTCs): Built-in database of HVAC-specific fault codes with elaboration details (Active, Intermittent, etc.).
  • Measurement Blocks: View all sensor data (temperatures, flap positions, compressor voltages) across all 8 HVAC measurement groups.
  • Live Data Monitor: Stream live sensor data via Server-Sent Events (SSE) with real-time sparkline charts.

Requirements

  • Python 3.9+
  • A genuine FTDI FT232RL based KKL VAG-COM cable. (Warning: Cheap clone chips often struggle with the precise 5-baud timing required to wake up the ECU).

Python Dependencies

pip install -r requirements.txt

(This project uses only pyserial for hardware communication and Flask for the web server).

Usage

  1. Connect your KKL cable to your vehicle's OBD-II port.
  2. Turn the ignition to the ON position (engine does not need to be running, but climate control must have power).
  3. Connect the KKL cable to your computer's USB port.

  4. Start the server:

    python app.py

  5. Open your web browser and navigate to http://127.0.0.1:5000

  6. Select your port and click Connect.

Safety Warning

CAUTION: This tool communicates directly with vehicle electronics on the K-Line. While it is designed to be read-only (with explicit confirmation required for clearing faults), using incorrect or cheap counterfeit cables can potentially introduce noise on the K-Line or cause communication errors. Do not use this tool while the vehicle is in motion.

Technical Details

  • Protocol: KWP1281 (Key-Word Protocol 1281) via K-Line (ISO 9141).
  • Initialization: 5-baud "slow init" bit-banging via standard UART Break signals.
  • Module Address: 0x08 (Auto HVAC).
  • Communication: Byte-level complement acknowledgement system.